View E3V3_5758612.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

built-in amplifier photoelectric sensor E3V3 easy-to-use, low-cost photoelectric sensor incorporating indicators that can be clearly seen from a distance conforms to en and iec standards incorporating polarizing function, thus accurately detecting shiny objects resin-filled construction resists vibration and ensures ip67 water-resistance 2 meter attached cable ordering information connections supply voltage sensing type sensing range output part number yg gy mode type pre-leaded 12 to 24 vdc through-beam 7 m (23 ft) light-on/dark- npn E3V3-t61 g () g on ( selectable pnp E3V3-t81 on (selectable by wiring) pnp E3V3 - t81 polarized 2 m (6.6 ft) by wiring) npn E3V3-r61 retroreflective () pnp E3V3-r81 diffuse 0.5 to 8 cm npn E3V3-d61 reflective (0.20 to 3.15 in) pnp E3V3-d81 70 cm (2.3 ft) npn E3V3-d62 () pnp E3V3-d82 pigtail lead with 12 to 24 vdc through-beam 7 m (23 ft) light-on/dark- npn E3V3-t61-m3j g m8 connector g () g on (selectable by wiring) pnp E3V3-t81-m3j polarized 2 m (6.6 ft) by wiring) npn E3V3-r61-m3j retroreflective () pnp E3V3-r81-m3j diffuse 0.5 to 8 cm npn E3V3-d61-m3j reflective (0.20 to 3.15 in) pnp E3V3-d81-m3j 70 cm (2.3 ft) npn E3V3-d62-m3j () pnp E3V3-d82-m3j note: mounting brackets are not provided with the E3V3. order them separately below. connector cordsets description part number straight connector, 2 m (6.56 ft), 4-conductor cable xs3f-m421-402-r straight connector, 5 m (16.4 ft), 4-conductor cable xs3f-m421-405-r extension cable, 2 m (6.56 ft), connectors at both ends xs3w-m421-402-r extension cable, 5 m (16.4 ft), connectors at both ends xs3w-m421-405-r .com .com .com 4 .com u datasheet
E3V3 E3V3 2 accessories description part number slits for through-beam type, set of 3 pairs includes 0.5 mm, 1 mm and 2 mm slits e39-s7 reflectors corner cube type 5 to 100 cm (2.0 in to 1.64 ft) e39-r3 glass bead, adhesive back 20 to 50 cm (7.9 in to 19.7 in) e39-rsa , 20 to 80 cm (7.9 in to 31.5 in) e39-rsb optional mounting brackets side mounting bracket e39-l43 g rear-mounting bracket e39-l44 rotating post bracket e39-l93 metal cover bracket e39-l98 vertical mounting bracket e39-l104 for e39-r1 reflector e39-l7 replacement part description part number reflector supplied with each retroreflective sensor e39-r1 specifications sensing method through-beam retroreflective (with msr function) diffuse reflective npn output E3V3-t61 E3V3-r61 E3V3-d61 E3V3-d62 pnp output E3V3-t81 E3V3-r81 E3V3-d81 E3V3-d82 led light source infrared led red led infrared led sensitivity adjustment adjustor connection method pre-leaded: 2 m (6.6 ft) weight approx. 160 g (with 2-m cord) approx. 80 g (with 2-m cord) mode wire selectable (light-on or dark-on) circuit protection overload protection, reversed connection protection, and mutual interference prevention function (except for through-beam models) indicators operation indicator (orange), stability indicator (green), emission indicator for through-beam models only (orange) materials case heat-resistive abs lens methacrylic resin attachments instruction sheet and reflector (e39-r1 retroreflective model only) (see note.) note: the mounting brackets are sold separately. .com .com .com .com 4 .com u datasheet
E3V3 E3V3 3 ratings/characteristics part number E3V3-t61/-t81 E3V3-r61/-r81 E3V3-d61/-d81 E3V3-d62/-d82 sensing method through-beam retroreflective (with msr function) diffuse reflective supply voltage 12 to 24 vdc 10%, ripple (p-p): 10% max. current consumption 50 ma max. 40 ma max. detection distance 7 m 0.1 to 2 m (with e39-r1) 0.5 to 8 cm 70 cm standard detectable object opaque object: 7 mm min. (0.28 in) opaque object: 30 mm min. (1.18 in) 10 x 10 cm white paper 20 x 20 cm white paper directional angle 3 to 15 receiver/emitter: 2 to 10 reflector: 30 min. --- differential travel --- 20% max. of detection distance response time 1 ms max. for both operation and release control output 100 ma max. at 30 vdc, open collector output (residual voltage: 1 v max.) ambient illumination incandescent lamp illumination on optical spot: 3,000 x max. sunlight illumination on optical spot: 10,000 x max. ambient operating 25 c to 55 c (13 f to 131 f) with no icing temperature storage 40 c to 70 c (40 f to 158 f) relative operating 35% to 85% humidity storage 35% to 95% insulation resistance 20 m w min. (at 500 vdc) dielectric strength 1,000 vac, 50/60 hz for 1 min vibration resistance 10 to 55 hz, 1.5-mm double amplitude for 2 hrs each in x, y, and z directions shock resistance 500 m/s 2 (approx. 50g) 3 times each in x, y, and z directions enclosure rating iec ip67 .com .com .com .com 4 .com u datasheet
E3V3 E3V3 4 engineering data parallel operating range (typical) E3V3-t 1 reflector parallel movement (typical) E3V3-r 1 operating range (typical) E3V3-d 2 parallel operating range y (cm) detection distance x (m) parallel operating range y (mm) detection distance x (m) operating position y (mm) detection distance x (cm) reflector placed vertically detection distance vs. object size (typical) color of object vs. operating range (typical) detection distance vs. object size (typical) detection distance (cm) size of object d (cm) parallel operating range y (mm) detection distance x (mm) black carbon white paper sus (lustrous) black carbon white paper detection distance x (mm) sus (lustrous) detectable object (200 x 200 mm) detectable object: white paper detection distance (mm) size of object d (mm) E3V3-d 2 E3V3-d 1 E3V3-d 1 .com .com .com .com 4 .com u datasheet
E3V3 E3V3 5 E3V3-d 1 excess gain ratio distance (cm) operating level excess gain vs. set distance (typical) E3V3-t 1 E3V3-r 1 E3V3-d 2 excess gain ratio distance (m) distance (m) distance (cm) excess gain ratio excess gain ratio operating level operating level operating level operation output circuits output configuration mode switch connection method output circuits npn (E3V3- 6 ) light-on connect the pink cord to the brown cord. (see note.) connector pin arrangement operation indicator (orange) stability indicator (green) main circuit load (relay) operating selection brown black blue pink 0 v 12 to 24 vdc 100 ma max. dark-on connect the pink cord to the blue cord or disconnect the pink cord from the blue cord. (see note.) connector pin arrangement operation indicator (orange) stability indicator (green) main circuit load (relay) operating selection brown black blue pink 0 v 12 to 24 vdc 100 ma max. .com .com .com .com 4 .com u datasheet
E3V3 E3V3 6 output configuration output circuits connection method mode switch pnp (E3V3- 8 ) light-on connect the pink cord to the brown cord. (see note.) connector pin arrangement operation indicator (orange) stability indicator (green) main circuit brown black blue pink load (relay) 0 v 12 to 24 vdc operating selection 100 ma max. dark-on connect the pink cord to the blue cord or disconnect the pink cord from the blue cord (see note.) connector pin arrangement operation indicator (orange) stability indicator (green) main circuit brown black blue pink load (relay) 0 v 12 to 24 vdc operating selection 100 ma max. note: the E3V3 model with a junction connector has a white cord instead of a pink cord. emitter (npn/pnp) connector pin arrangement main circuit 12 to 24 vdc emitter indicator (orange) blue brown timing charts output configuration mode switch connection method timing chart npn (E3V3- 6 ) light-on connect the pink cord to the brown cord. (see note.) light indicator (orange) on off output transistor load (relay) operate release on off (between brown and black) light received light not received dark-on connect the pink cord to the blue cord or disconnect the pink cord from the blue cord. (see note.) light indicator (orange) on off output transistor load (relay) operate release on off light received light not received (between brown and black) pnp (E3V3- 8 ) light-on connect the pink cord to the brown cord. (see note.) light indicator (orange) on off output transistor load (relay) operate release on off (between blue and black) light received light not received dark-on connect the pink cord to the blue cord or disconnect the pink cord from the blue cord. (see note.) light indicator (orange) on off output transistor load (relay) operate release on off light received light not received (between blue and black) note: the E3V3 model with a junction connector has a white cord instead of a pink cord. .com .com .com .com 4 .com u datasheet
E3V3 E3V3 7 sensitivity adjustment (reflective sensors) (diffuse reflective model in light-on mode) item position a position b setting sensing condition photoelectric sensor detectable object photoelectric sensor background object detectable object --- sensitivity adjustor indicators off on stability (green) operation (orange) off off stability (green) operation (orange) off on stability (green) operation (orange) procedure locate the sensing object at the detection distance of the E3V3 and turn the sensitivity adjustor clockwise to increase the sensitivity of the E3V3 until the orange operation indicator is lit. the moment the orange operation indicator is lit, stop turning the sensitivity adjustor, the position of which is point a. remove the sensing object and turn the sensitivity adjustor clockwise until the E3V3 detects the background object and the orange operation indicator is lit. the moment the orange operation indicator is lit, stop turning the sensitivity adjustor, the position of which is point b. turn the sensitivity adjustor counterclockwise to decrease the sensitivity of the E3V3 until the orange operation indicator is off. the moment the orange operation indicator is off, stop turning the sensitivity adjustor, the position of which is point c. if there is no background object, point c is where the sensitivity adjustor is set to maximum. set the sensitivity adjustor midway between points a and c, where the best sensitivity of the E3V3 for the sensing object is ensured, and make sure that the green stability indicator is lit with and without the sensing object at that position of the sensitivity adjustor. if the green stability is not lit, try another sensing method. note: the rotation range of the sensitivity adjustor is 240 . do not try to turn the sensitivity adjustor clockwise or counterclockwise excessively, otherwise the sensitivity adjustor will break. .com .com .com .com 4 .com u datasheet
E3V3 E3V3 8 dimensions unit: mm (inch) E3V3-t note: the emitter has no indicators except for an emission indicator. E3V3-d note: 18.4 (0.72) for E3V3-d61/-d81. E3V3-r operation indicator (see note.) stability indicator (see note.) optical axis lens sensitivity adjustor vinyl-insulated cord with four conductors, 4 dia. (16 x 0.12 dia.); standard length: 2 m brown: vcc blue: 0 v black: output pink: mode selection each cord of the emitter consists of two conductors two, m3 optical axis lens optical axis lens 18 (0.71) 11.3 (0.44) 10.4 (0.41) 3.95 (0.16) 0.5 (0.02) 15.7 (0.62) 9.6 (0.38) 18.3 (0.72) 37.5 (1.48) 35.5 (1.40) 25.4 (1.00) 3 (0.12) 7 (0.28) operation indicator stability indicator sensitivity adjustor vinyl-insulated cord with four conductors, 4 dia. (16 x 0.12 dia.); standard length: 2 m brown: vcc blue: 0 v black: output pink: mode selection two, m3 18 (0.71) 11.3 (0.44) 10.4 (0.41) 3.95 (0.16) 0.5 (0.02) 15.7 (0.62) 37.5 (1.48) 35.5 (1.40) 25.4 (1.00) 3 (0.12) 7 (0.28) 14.8 (0.58) 17 (0.67) (see note.) operation indicator stability indicator sensitivity adjustor vinyl-insulated cord with four conductors, 4 dia. (16 x 0.12 dia.); standard length: 2 m brown: vcc blue: 0 v black: output pink: mode selection two, m3 18 (0.71) 11.3 (0.44) 10.4 (0.41) 3.95 (0.16) 0.5 (0.02) 15.7 (0.62) 3 (0.12) 7.6 4 (0.16) 4 (0.16) 4 (0.16) 21 (0.83) 14.4 8 6.4 (0.25) 17 (0.67) 2 (0.08) 25.4 (1.00) (1.40) 37.5 (1.48) 35.5 .com .com .com .com 4 .com u datasheet
E3V3 E3V3 9 e39-r3 retroreflector (small type) with mounting bracket (sold together) e39-rsa retroreflector (tape type) e39-rsb retroreflector (tape type) adhesive tape two, 3.2 dia. two, m3 two, m3 adhesive tape reflecting surface adhesive tape reflecting surface four, r1 four, r1 11 (0.43) 20 (0.79) 0.2 (0.01) 34.8 (1.37) 19.3 (0.76) 22.5 (0.89) 2.6 (0.10) 1.2 (0.05) 38 (1.50) 34 (1.34) 25.4 (0.10) 29 (1.14) 6 4.5 (0.18) 7 3.4 22.9 11 (0.43) 0.2 (0.01) 0.2 (0.01) 13.7 14 20 (0.79) 41.8 (1.65) 10.1 1.2 (0.05) 38 (1.50) r25.4 (0.90) 18.45 (0.73) (0.13) 1.2 (0.05) 10 16 (0.63) 28 (1.10) 10 (0.39) 8 35 (1.38) 33 (1.30) 0.7 (0.03) 40 (1.57) 38 (1.50) 0.7 (0.03) 35 (1.38) 33 (1.30) 34 (1.34) 3.4 25.4 .01 (1.00 .01) e39-r1 retroreflector provided with the E3V3-r61/-r81 two, 3.5 dia 59.9 (2.36) 52 (2.05) 1.6 (0.06) 8 (0.31) 2.7 (0.11) 7.5 (0.30) 34 (1.34) 40.3 (1.59) 7 (0.28) reflectors mounting brackets e39-l104 e39-l44 e39-l43 e39-l98 e39-l93 .com .com .com .com 4 .com u datasheet
E3V3 E3V3 10 e39-l104 mounting bracket with mounting bracket (E3V3-d62) optical axis two, m3 two, 3.2 dia. r1.7 r1.7 r1.6 r3.5 r25.4 5.8 12.5 39 (1.54) 37.8 (1.49) 8.8 3.5 (0.14) 16 (0.63) 3.2 (0.13) 13.7 6 3.4 29 (1.14) 4.5 (0.18) 14 r20 24.1 (0.95) 14 1.2 (0.05) 10.1 (0.40) 25.4 (1.00) 42.8 (1.69) 35.5 (1.40) 2 18 (0.71) 3 (0.12) 29 (1.14) 7 13.7 (0.54) 10.4 12.2 (0.48) r1 r1 3.4 10 10 e39-l44 with mounting bracket (E3V3-d62) optical axis optical axis 3.2 dia. four, 3.2 dia. two, m3 two, m3 e39-l43 with mounting bracket (E3V3-d62) 1.2 (0.05) 8.7 16.2 (0.64) 6 6 3.4 (0.13) r1 r1 31.2 (1.23) 3.2 18 r3.5 3.5 (0.14) 14 (0.55) r2 1.2 (0.05) 23.2 (0.91) 36 (1.42) 9 10.4 (0.41) 13.9 (0.55) 16.2 (0.64) 8.7 18 (0.71) 5.9 9 2 (0.08) 39.6 (1.60) 35.5 (1.40) 25.4 (1.00) 31.2 (1.23) 36 (1.42) 1.2 (0.05) 23.2 (0.91) 3 (0.12) 18 (0.71) 3.5 (0.14) 30 (1.18) 3.5 (0.14) 7 25.4 (1.00) 40 (1.60) 3.4 (0.13) 6 (0.24) 5 (0.20) 3.4 15 r1 r2 r2 13 (0.51) 7.5 13 (0.51) 6.6 1.2 (0.05) 29.1 (1.15) 14 10.4 2 (0.08) 47.6 (1.87) 35.5 (1.40) 25.4 (1.00) 15.1 15 7.5 40 (1.60) 3.5 (0.14) 3.5 (0.14) 30 (1.18) 3 18 (0.71) 20 (0.71) 20 .com .com .com .com 4 .com u datasheet
E3V3 E3V3 11 e39-l98 with mounting bracket (E3V3-d62) optical axis (for E3V3) 58 dia. 58 dia. two, m3 four, r3.3 two, r28 two, r22 30 30 61 (2.40) 2 16 56 (2.20) 8 24 34 (1.34) 25 (0.98) 20 (0.79) 6.5 4 25.4 (1.00) 61 (2.40) 36.6 (1.44) 2 56 (2.20) 10.4 7.2 25.4 (1.00) 16 (0.63) 34 (1.34) 3 (0.12) 18 (0.71) 44 (1.73) 48 (1.89) e39-l93 optical axis 3.2 dia. four, 6.5 dia. two, m3 8 128 (5.04) 213 (8.39) 53 (2.09) 29 (1.15) 19 8 32 46 15 15 20.7 25.8 15.5 167 (6.57) 48 (1.89) 59 (2.32) 27 6.7 (0.26) 24 48 (1.89) 40 (1.57) 33 (1.30) 19 32 (1.26) (1.81) .com .com .com .com 4 .com u datasheet
E3V3 E3V3 e39-s7 slits for E3V3-t (two pairs; a total of 6 slits) 9.2 (0.36) 18.9 (0.74) 7.2 note: 1. a: 0.5, 1, or 2 dia. 2. attach an e39-s7 slit to both the emission panel of the emitter and the receiver's sensing panel of the E3V3-t . a (see note.) detection distance (rating) slit size 0.5 dia. 1 dia. 2 dia. emitter and receiver 25 mm (0.98) 100 mm (3.94) 400 mm (15.75) receiver 400 mm (15.75) 800 mm (31.50) 1,500 mm (59.06) precautions power supply the permissible voltage imposed on the E3V3 must be 24 vdc + 10% maximum (i.e., 26.4 v). make sure that the voltage imposed on the E3V3 is correct before turning the E3V3 on. if a standard switching regulator is used as a power supply, the frame ground (fg) terminal and the ground (g) terminal must be grounded, or the E3V3 may malfunction due to the switching noise of the power supply. operation of the E3V3 with power turned on the E3V3 is ready to detect objects within 100 ms after the E3V3 is turned on. if the E3V3 and the load connected to the E3V3 each use an independent power supply, be sure to turn on the E3V3 first and then the load. connection if the input/output lines of the photoelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photo- electric sensor could be induced to malfunction, or even be dam- aged by electrical noise. either separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. the cord connected to the E3V3 can be extended up to 100 m pro- vided that the diameter of each wire of the cord is 0.3 mm 2 minimum. water resistance do not use the E3V3 in water, in the rain, or outdoors. mounting when mounting the E3V3, do not hit the E3V3 with a hammer, or the E3V3 will loose watertightness. use m3 screws to mount the E3V3. move the E3V3 up, down, left, and right to find the range where the operating indicator is lit or unlit. then locate the E3V3 in the center of the range, and make sure that the stability indicator is lit. precautions when using the e39-r3, e39-rsa, or e39-rsb reflector before applying adhesive tape to the reflector, make sure that the reflector is free from oil or dust, or the adhesive tape will not stick to the reflector properly. do not cut or scratch the reflector or the reflector will loose water- tightness. do not press the reflector with a metal object or a nail, or the reflector will not function properly. warning the E3V3 is not a safety component for ensuring the safety of people as defined in ec directive 91/368/eec, or as covered by separate european standards or by any other regulations or standards. cat. no. cedsax3 10/99 specifications subject to change without notice. printed in u.s.a. omron electronics, inc. one east commerce drive schaumburg, il 60173 note: dimensions shown are in millimeters. to convert millimeters to inches divide by 25.4. 1-800-55-omron omron canada, inc. 885 milner avenue scarborough, ontario m1b 5v8 416-286-6465 ! .com .com .com 4 .com u datasheet

▲Up To Search▲

Price & Availability of E3V3

	To Download E3V3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .